English (United Kingdom) 
Українська (Україна) 
Русский (Россия)
|
SmartStairway SS-26 |
SmartStairway SS-26 LCD |
SmartStairway SS-26 Pro |
SmartStairway SS-281X Wi-Fi |
|
| Central processor | ATmega168, 8 mHz, SRAM 1kBt, EEPROM 512Bt, RAM 16kBt | ATmega328, 16mHz, SRAM 1kBt, EEPROM 512Bt, RAM 32kBt | ATmega328p, 16mHz, SRAM 1kBt, EEPROM 512Bt, RAM 32kBt |
XTensa LX6 32-bit, 2 core, 240mHz, 448KB ROM 520KB SRAM |
| Wireless connection | - | - | - |
+ WiFi: 802.11 |
| Supply voltage | DC 12-24V | DC 12-24V | DC 12-24V |
DC 5-12V |
| Settings interface | LED on the case. 3 buttons, indication using the first 4 steps | 3 buttons, display indication, demo. with the help of steps | 3 buttons, display indication, demo. with the help of steps | With the help of the WEB-interface of the device connected to the controller with the help of the WEB-browser. LED on the case. 2 touch buttons for forcing the stairs on/off. |
| Number of steps | from the 4th to the 26th | from the 4th to the 26th | from the 4th to the 26th | to the 32nd |
| Type of light source | LED tape, LED lights. That support PWM dimming | LED tape, LED lights. That support PWM dimming | LED tape, LED lights. That support PWM dimming | Addressable LED RGB SMART tape of Neopixe, WS2811, WS2812 and similar types |
| Maximum load power for 1 channel | 0.4A (4.8W at 12V and 9.6W at 24V light sources) | 0.4A (4.8W at 12V and 9.6W at 24V light sources) | 5A (60W at 12V and 120W at 24V light sources) | The parameter is not valid. |
| Protection of digital inputs from connection errors. | - | Current protection |
Current protection in + ESD protection against electrostatic discharge. |
Current protection |
| Color of light | Monochrome. (it is possible to use RGB only under the conditions of using an additional amplifier with a built-in RGB controller SmartStairway APS21-RGB) |
Monochrome. (it is possible to use RGB only under the conditions of using an additional amplifier with a built-in RGB controller SmartStairway APS21-RGB) |
Monochrome. (it is possible to use RGB only under the conditions of using an additional amplifier with a built-in RGB controller SmartStairway APS21-RGB) |
Multi-color RGB SMART where the color and brightness of each individual LED or module of 3 LEDs is set (depending on the tape). |
| Type of supported sensors |
PIR - pyroelectric PNP (logical 1 when motion is detected) Ultrasonic - ultrasonic distance meters. Microwave - PNP movement sensors based on the Doppler effect |
PIR - pyroelectric PNP (logical 1 when motion is detected) Ultrasonic - ultrasonic distance meters. Microwave - PNP movement sensors based on the Doppler effect IR-infrared NPN distance sensors on the reflected beam with logic 0 when obstacles are detected |
PIR - pyroelectric PNP (logical 1 when motion is detected) Ultrasonic - ultrasonic distance meters. Microwave - PNP movement sensors based on the Doppler effect IR-infrared NPN distance sensors on the reflected beam with logic 0 when obstacles are detected |
PIR - pyroelectric PNP (logical 1 when motion is detected) Ultrasonic - ultrasonic distance meters. Microwave - PNP movement sensors based on the Doppler effect |
| Indoor light level sensor support. | Yes . Day/night mode (switching off when the light level is above the set threshold. Requires installing the sensor so that the light from the stairs does not fall on it) | Yes . Day/night mode (switching off when the light level is above the set threshold. The light level sensor can be installed directly on the stairs, when the light on the stairs is turned on, the sensor is blocked and does not lead to unwanted shutdown of the stairs) | Yes . Day/night mode (switching off when the light level is above the set threshold. The light level sensor can be installed directly on the stairs, when the light on the stairs is turned on, the sensor is blocked and does not lead to unwanted shutdown of the stairs) | Yes. Day/night mode and adaptive mode. It can change the brightness of the light on the steps depending on the level of illumination, which prevents blinding in the dark. All parameters are adjusted according to the user's wishes. |
| Illumination of the first and last steps in standby mode. | Yes. Brightness is adjustable from 0 to 100%. | Yes. Brightness is adjustable from 0 to 100%. | Yes. Brightness is adjustable from 0 to 100%. | Yes. There are static and many dynamic modes of lighting the stairs while waiting. Both the first and last steps, as well as the extreme LEDs of each step, or signal dynamic lights on the steps in animated modes can be turned on. |
| Setting the general brightness of the stairs. | Yes. From 20% to 100% | Yes. From 20% to 100% | Yes. From 20% to 100% |
Yes. Also, thanks to the adaptive mode, it can automatically change depending on the level of illumination in the room. |
